SURFACE ROUGHNESS TESTER SRT-6200

Surface Roughness Tester: 1)Very easy to operate 2)Highly sophisticated inductance sensor

 Surface Roughness Tester:1)Very easy to operate2)Highly sophisticated inductance sensor 

1.FEATURES

This instrument is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters.When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism  inside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier.The exclusive DSP processes and calculates and then outputs the measurement results on LCD.

* Very easy to operate

* Multiple parameter measurement: Ra, Rz

* Highly sophisticated inductance sensor

* Built-in lithium ion rechargeable battery and control

   circuit with high capacity

* Small in size, light in weight and easy to use

* Can communicate with PC computer for statistics,

   printing and analysing by the optional cable and the

   software for RS232C interface.

*Manual or automatic shut down. The tester can be 

   switched off  by pressing  the Power key at any time.

   On the other hand, the tester will power itself off

   about 5 minutes after the last  key operation.

2.SPECIFICATIONS

Display	4 digits, 10 mm LCD, with blue backlight
Parameters	Ra, Rz
Display  Range	Ra:   0.05-10.00um/1.000-400.0uinch Rz:   0.020-100.0um/0.780-4000uinch
Accuracy	Not more than ?0%
Fluctuation of display value	Not more than 6%
Sensor	Test Principle: Inductance type  Radius of Probe Pin: 10um  Material of Probe Pin: Diamond  Measurement Force of Probe: 16mN(1.6gf)   Probe Angle: 90° Vertical Radius of Guiding Head: 48mm
Maximum driving stroke	17.5mm/0.7inch
Cutoff length (l)	0.25mm / 0.8mm / 2.5mm  optional
Evaluation length	1~5 cut off  optional
Driving speed	sampling length = 0.25mm   Vt=0.135mm/s sampling length = 0.8mm    Vt=0.5mm/s sampling length = 2.5mm    Vt=1mm/s returning                                Vt=1mm/s
Resolution	0.001μm    if reading <10μm 0.01μm    if 10μm≤reading<100μm 0.1μm    if reading ≥100μm
Power Li-ion battery	rechargeable
Operating conditions	Temp. 0~50°C Humidity <80%
Size	140x57x48 mm  (5.5x2.2x1.9 inch)
Weight	about 420 g

SURFACE ROUGHNESS TESTER SRT-6200